SuperSafe®️ Recycled Rubber Granules
SuperSafe Recycled Rubber Granules or SBR Granules (Styrene-Butadiene-Rubber) are primarily derived from the process of crushing recycled tires. This process involves breaking down used tires into smaller pieces, which are then further processed to obtain the desired granule size and quality.
Our SBR Granules are available in a range of sizes and are mostly used for the base layer of rubber flooring and EPDM granules flooring.
SBR is used for a variety of applications and surfaces, especially for sports flooring and playground flooring.
SBR Rubber Granules
SBR Granules Fine
Size: 0.5-1mm
SBR Granules
Size: 1-3mm
SBR Granules
Size: 3-5mm
SBR Granules Shred
1. Purpose
This guide provides the recommended procedures for installation of EPDM rubber granules using polyurethane (PU) binder and outlines corrective actions for issues during installation or operation.
2. Scope
Applies to EPDM rubber granules used for playgrounds, running tracks, walkways and recreational flooring.
Tab Content
3. Materials Required
– EPDM Rubber Granules
– Polyurethane (PU) Binder
– PU Primer (where required)
– Approved solvent/cleaner
– Mixing equipment and PPE
4. Environmental Conditions
Temperature: 10°C–35°C
Relative humidity: <85%
Dry substrate required
No rain or standing water during installation
5. Surface Preparation
Substrate must be clean, dry, and structurally sound. Remove dust, oil, grease and loose particles. Repair all defects before installation and apply primer if required.
Tab Content
Tab Content
Tab Content
Tab Content